Skip to main content
HIGH SPEED

FAST

Laser Cutting Machine

Power up to

20 kW

WORKING AREA UP TO

19.9' X 6.7'

Our revolutionary new lightning-fast fiber laser model, achieving high-speed movements up to 4.2G when cutting material up to 1” without compromising quality, even on the most complex shapes.

Fast Laser Cutting Machine

Lightning Fast Laser Machine

Cutlite Penta presents the FAST, our revolutionary new lightning fast fiber laser model, designed and tested to achieve high-speed movements up to 4.2G when cutting material up to 1” without compromising quality, even on the most complex shapes.

Request A Quote

    The epitome of efficiency, technology, & guaranteed results.

    Hardware Solutions

    SMART Mix (laser sources 20kW and up)

    The SMART Mix option includes a component that enhances the cutting process through hardware technology controlled in real-time by our Smart Manager software. With just a few clicks, the right amount of oxygen and nitrogen can be supplied instantly for cutting varying metal types and thicknesses, saving gas consumption and delivering a cool part for fast removal from the table.

    SMART Changer

    This upgrade allows the laser machine to automatically replace the cutting head nozzle without operator intervention. Up to 10 positions are available, including both cleaning and calibration functions. This solution, paired with automation, allows for full "lights-out" operation on laser systems with shuttle tables.

    SMART Camera

    Multiple cameras may be installed inside the laser cabin for multi-angle remote viewing. One camera is included with the system.

    SMART Flow Automated Loading and Unloading

    Cutlite Penta can fully automate your metal cutting operation by pairing your laser cutting system with our automation and storage systems, reducing loading and unloading times. We can tailor a fully automated loading and unloading system for your location positioned above the laser pallet changer at either 90° or in-line with the pallet changer, with or without a storage tower.

    SMART Raster

    SMART Raster is an optional software tool that allows the machines to raster identification numbers or images on stainless steel.

    Two Level Pallet Exchange

    Two-level worktable changeover allows the table to be changed in approximately 15 seconds, almost completely masking loading and unloading times – the fiber plus system is the fastest on the market today.

    Technical Features

    Available Configurations

    • Working area up to 19.9’Long
    • Working area up to 6.7′ Wide

    Power Source Options

    IPG power levels 6kW to 50kW

    Comparison of All Machines

    XMEFASTFiberHDPlus BevelPlus Evo
    Cutting Thicknessup to 1"*up to 2"TBDup to 2.5"up to 2.5"
    Bevel (Y/N?)NoNoYesYesNo
    Power Up To20kW20 kW30kW30kW30kW
    Working Area up to20.4’ X 8.4’19.9 x 6.7 ft. CustomCustomCustom
    Max Acceleration2G4G1.2G1.8G3.2G
    Nozzle ChangeYesYesNoYesYes
    Gas MixYesYesYesYesYes
    LIFT TableUpgradeNoNoYesYes
    2 level shuttle tableYesYesNoYesYes
    Table Weight Capacity2 sheets of 1" thick2 sheets of 2" thick1 sheet of 4" thick2 sheets of 2" thick2 sheets of 2" thick
    Linear DriveNoYesNoYesYes
    Rack & Pinion DriveYesNoYesNoNo
    Automation ReadyYesYesNoYesYes
    IPG ResonatorYesYesYesYesYes
    Raycus ResonatorYesNoYesNoNo
    Made in ItalyYesYesYesYesYes

    EVO 3 Head

    The FAST system uses the EVO 3 cutting head, renowned for its reliability when integrated with high-power fiber laser sources. Completely designed and built in Italy, this autofocusing cutting head offers exceptional cutting speeds on both thin and thick materials. The head and focusing lenses can be used with up to 30KW of laser power and a pressure of 25 bar. There are three focal configurations to choose from: 150, 200, and 250mm.

    Base Structure and Gantry Movement

    The FAST model features a fully redesigned gantry to minimize weight while retaining the rigidity required for stable and repeatable cutting results. The machine’s base is built with 100 mm-thick side frames and a lower center of gravity, resulting in an extremely low mass ratio of static to moving parts. This allows linear motors—the same reliable, well-tested motors used on the PLUS models—to be placed in a horizontal configuration on the shoulders of the base structure. This setup optimizes dynamic performance, enabling zero radial jerk movements without producing vibrations that could cause material movement on the cutting table.

    Fiber Laser Source

    Cutlite Penta’s extensive experience and research, combined with the use of high-power sources in the FAST model, ensure high acceleration and cutting speeds with unmatched cutting quality on materials up to 1” in thickness. The highly efficient IPG laser source, featuring excellent beam quality and low electric consumption, is housed in an air-conditioned and sealed NEMA 12 cabinet, guaranteeing operation even in the harshest environments. The solid-state reliability of the IPG source virtually eliminates costly maintenance required by competitive laser models.

    Automation

    Cutlite Penta can fully automate your metal cutting operation by customizing your laser cutting system, reducing loading and unloading times. Available automatic step or automatic bundle loaders work seamlessly with our laser cutters and our optional compact or flexible warehouse storage systems. For even more customization, we offer fully automated loading and unloading systems that are positioned above the laser pallet changer at either 90° or in-line with the pallet changer.

    Advanced Software

    Smart Manager Plus

    Laser cutting has never been so easy with our proprietary interface, Smart Manager Plus. Our user-friendly and intuitive Windows based front-end software is designed to provide even more options to take full advantage of all that our laser systems can do. Our software is designed for compatibility with most CAD/CAM software and simplifies even the most complex cutting configurations.

    Recent innovations include:

    • Auto plate edge acquisition
    • Scheduling
    • Cutting Lost
    • Fast Piercing
    • Smart Focus
    • Auto Power Off
    • Raster Module

    Smart Composer

    Smart Composer allows the user to modify previously created nesting, adding and removing patterns, and the ability to manage lead-ins/lead-outs. In addition, Smart Composer reduces the time for designing and optimizing the sheet, cutting down production costs. This software add-on is included with all Cutlite Penta laser systems.